|
|
- EZ-Mount is designed to place snow plow weight close to the front axle for better overall weight distribution.
- EZ-Mount has hardened steel receiver tubes with adjustable slack control, for easy on and easy off while maintaining a perfect fit.
- EZ-Mount does not require the ground to be level for moldboard storage or re-attaching. It's easy; just use the E-60 electric hydraulic lift to raise the moldboard sector and A-frame component off the ground and swing into place.
- Quick removal of the snow plow assembly takes just 1-2-3 easy steps.
This exclusive Meyer feature make handling of the components very manageable. The lift frame and lights are a single component, separate
from the moldboard and can be carried through a standard size door for safe inside storage.
- When winter turns to spring, it only takes a minute to remove two pins, pull the electrical disconnects and slide out the snow plow and lift frame, leaving the front of your vehicle clean and neat. When it's time to re-install, the
EZ-Mount makes it easy as 1-2-3! |
